I'm going nuts trying to mate my Intex hoses to new heater. I wanted to avoid going full PVC. Watched a YouTube video where Intex Adapter B fit inside 1 1/4" PVC. So I reduced the heater to 1 1/4 but the PVC cement failed to adhere to the Intex adapter. Any suggestions for a glue that will form a water tight seal between PVC and the smooth adapter B plastic?
Intex hose to pvc
- Thread starter Capz65
- Start date
- Apr 10, 2018
- 5,209
- Pool Size
- 18375
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
Hey Capz,
Not much Intex experience for me, but check out this thread. I'm not quite sure what you're trying to do, but @Wardf came across a hack that may help you out.
www.troublefreepool.com
Not much Intex experience for me, but check out this thread. I'm not quite sure what you're trying to do, but @Wardf came across a hack that may help you out.
Intex salt water hard line plumbing
I have a pentair pump and filter and I'm having no problem getting the plumbing fittings to hook them up. My Saltwater system is a different story. It looks like the male threads on the Itex are 2" DWS, and I want to get to 1 1/2" PVC. So I need 2 fittings that go from 2" DWS to a 1 1/2"...
www.troublefreepool.com