Intelliflo3 Min/Max Settings

[nrobfd_pl]

Going to be setting up my new Intelliflo3 in the next few days. Trying to understand what I should do for the min / max rpm and gpm settings.

I have 2" piping at the pad, 2 - 1.5" returns to the pool, 2 - 1.5" lines from skimmers, a 1.5" line from the main drain. Equipment is:
Clean and Clear Plus 520, MasterTemp400 (with a bypass), and IC60.

I've read some threads and done some searching but a lot of the answers seem to be specific to each pool.

 

[mknauss]

I've read some threads and done some searching but a lot of the answers seem to be specific to each pool.

They are.
I have my maximum set at 2500 rpm. No need to go above that for any of the functions for my pool.

Yours may be different. But I suspect a max rpm of 3000 would be sufficient for nearly all pools.

I would ignore gpm. Just set the rpm to perform the function you need.

 

[DrewLG]

Your heater requires at least 40 GPM, so your maximum rate should be whatever RPM is necessary to get 40-50 GPM with the heater unbypassed.