Here are some ideas that Pentair can use to upgrade the Intellichlor with a software update.
1) Display the cell temperature in the Automation diagnostics.
2) Display volts and amps
3) Allow user to tell the software to ignore the cell temperature and use the system temperature when the cell thermistor goes bad.
4) Use the performance of the cell to calculate the salinity like the Aquarite does and calculate the cell performance by dividing the performance salinity by the conductivity salinity.
5) Allow the user to set the amount of chlorine to make per day in ppm.
6) When using percentage, display the approximate amount of chlorine being made per day in ppm and weight chlorine gas from the pump run time and the percentage.
7) Display the total runtime in hours.
1) Display the cell temperature in the Automation diagnostics.
2) Display volts and amps
3) Allow user to tell the software to ignore the cell temperature and use the system temperature when the cell thermistor goes bad.
4) Use the performance of the cell to calculate the salinity like the Aquarite does and calculate the cell performance by dividing the performance salinity by the conductivity salinity.
5) Allow the user to set the amount of chlorine to make per day in ppm.
6) When using percentage, display the approximate amount of chlorine being made per day in ppm and weight chlorine gas from the pump run time and the percentage.
7) Display the total runtime in hours.