I'm using Home Assistant with the Pentair IntelliCenter integration and would like to be able to know when the acid pump and SWG are on to monitor dosing. Since this information is not available via the integration, I was wondering if there was another way to do this. I was looking at using the IntelliChem relays, since one is used for the pump. However the SWG is turned on via a control message. A light sensor on the SWG LEDs seems like a kludge. Any ideas are appreciated. TIA
IntelliChem Dosing
- Thread starter H2ObiWan
- Start date
- Jul 21, 2013
- 65,101
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
- Nov 12, 2017
- 12,636
- Pool Size
- 12300
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Implementing nodejs to give my HA system (not Home Assistant) access to what my pool is doing is a "someday" goal. There might be something there for your application.
www.troublefreepool.com
Pentair IntelliCenter Pool Control Dashboard Instructional Guide
Pentair IntelliCenter Pool Control Dashboard Instructional Guide (nodejs-poolController and nodejs-poolController-dashPanel) - Table of Contents – 1. Purpose and Background 2. Credits 3. Theory 4. Hosting Platform Options 5. Location and Connectivity Considerations and Options 6. Equipment...
www.troublefreepool.com