Intellicenter Wi-Fi Bridge Not Transmitting

[eni9889]

Hi all,

I just installed my intellicenter i8PS and everything is working well but I cannot get the Wi-Fi bridge to connect. The transmitting light won’t come on.

I’ve attached photos of my connections. Am i doing something wrong?

It is connected to my eero on the inside.

 

[ajw22]

Welcome to TFP.

You do not connect the outdoor antenna to the IntelliCenter using RS-485.

You should have got a black Ethernet cable that has a white pigtail coming out of it. The white pigtail plugs into the 24V DC socket at the upper left of the board. The other end plugs into the RJ45 J14 on the board.

Then you connect the grey outdoor Ethernet cable to the other end of the black POE cable run it out from the panel down the left side low voltage cable run and connect it to the RJ45 jack on the transceiver card.