Hi all,
We have an Intex Ultra Frame XTR 32'x16'x52", that we are setting up on a concrete pad and need advice. Last year we had the ground leveled and used the pink insulation boards under the pool itself and wooden boards level with the ground. This year with the slab will obviously be different, slab is 6", 4500 psi, reinforced with rebar and level (not sloped, bonded too). I know we were planning on retaping up the foam board and putting them under the pool to protect the bottom from the concrete. But what do we do for the legs? I worry about the straps rubbing against the concrete and the legs rubbing on the concrete itself. What do you all recommend?
We have an Intex Ultra Frame XTR 32'x16'x52", that we are setting up on a concrete pad and need advice. Last year we had the ground leveled and used the pink insulation boards under the pool itself and wooden boards level with the ground. This year with the slab will obviously be different, slab is 6", 4500 psi, reinforced with rebar and level (not sloped, bonded too). I know we were planning on retaping up the foam board and putting them under the pool to protect the bottom from the concrete. But what do we do for the legs? I worry about the straps rubbing against the concrete and the legs rubbing on the concrete itself. What do you all recommend?