In the slam process…,

Yep, dive down with phillips head screw driver.

Take the cover off the skimmer and post the model number...we'll figure out how to get them out. For now, try to get a picture of the foam in the weir door. Don't drop your phone!

Scrub the seam around the steps, where the liner meets the steps....that stuff hides in there.
 
I have to have my son do the drain. Here is the weir door…
 

Attachments

  • 1EA83E4B-B619-492C-A1EB-219D7E73E6D6.jpeg
    1EA83E4B-B619-492C-A1EB-219D7E73E6D6.jpeg
    148.6 KB · Views: 11
  • AD33D91C-ABED-4674-9779-9711BD96671F.jpeg
    AD33D91C-ABED-4674-9779-9711BD96671F.jpeg
    107.4 KB · Views: 11
Foam looks pretty clean.

To remove the weir, put your finger where the red arrow is pointing, on both sided, and squeeze gently. That pulls the pins out of the skimmer and allows the door removal.

1719610078933.png
 

Enjoying this content?

Support TFP with a donation.

Give Support
Here is our pool.

Still slamming today. Will do oclt tonight and tomorrow night. Hoping for some positive results. Thank you for all of your help yesterday. Will touch base again Monday. Fingers crossed 🤞
 

Attachments

  • BE0E53CC-81F6-4FCF-B6D3-9BB063458049.jpeg
    BE0E53CC-81F6-4FCF-B6D3-9BB063458049.jpeg
    637.7 KB · Views: 9
Hi - I performed oclt last night. My last test last night was at 16fc and this morning I was at 15fc. Pool clear, cc 0.

Today I am struggling to keep at slam level. Every time I check I am at 10 or 10.5fc. What the heck is going on. This is such a drastic change from the last few days. None of my test were this low. Any suggestions? I appreciate your help!
 

Enjoying this content?

Support TFP with a donation.

Give Support
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.