IC40 SWG Error Code help? Flashing green and red lights

[jrlund]

Hello,

I'm troubleshooting my IC40 SWG. It is showing a strange pattern of flashing lights, please see video link below. Can anyone help with what this error code might be?

New video by Jack Lund

photos.app.goo.gl

This SWG was working last summer. This flashing pattern happens on start up and doesn't stop (I've waited a few hours). I can't seem to find this flashing pattern in the manual

Any help appreciated.

 

[Jimrahbe]

Jr,

Nothing is wrong with your IC40, it is you...

The flashing railroad-like lights are normal at start up and then every 12 hours. This means the cell is determining the salt level of the pool water.

But.. You have a red flow light.. Without a green flow light NOTHING will work...

Fix your flow problem, and your flashing lights should go out within about 4 or 5 minutes of start up.

Thanks,

Jim R.

 

[JamesW]

The bottom scroll indicates Boost Mode.

The Top flashing is due to a No Flow Condition or a bad flow switch.

If you have good flow, then check the flow switch.

If you do not have good flow, then fix the flow issue, which might be a low pump setting and/or maybe a dirty filter etc.

 

[JamesW]

https://www.youtube.com/results?search_query=intellichlor+flow+switch