My fuse is blown for my IC40. I have replaced it twice and it immediately blows. The IC40 is only 2 years old. Does this definitely mean it is bad or does it mean that by cleaning the cell it is possible that the situation will resolve itself? Thanks so much for your help.
IC40 Blown fuse
- Thread starter goldmaes
- Start date
G,
It could not hurt to clean the cell, but I suspect the cell is bad. I would for sure at least look at it to see of it is just totally full of scale before I did anything else.
If the cell is only two years old, then it should still be under warranty.
Thanks,
Jim R.
It could not hurt to clean the cell, but I suspect the cell is bad. I would for sure at least look at it to see of it is just totally full of scale before I did anything else.
If the cell is only two years old, then it should still be under warranty.
Thanks,
Jim R.
Thank you I’ll do that this morning. I have confirmed it is the cell as the power center light comes on when the cell is disconnected however the second it is reconnected the fuse blows. Thanks so much for your help.