Looking for some help on what to do. My iAqualink has been working perfectly for the past 3weeks, but yesterday it started showing as offline on my phone. It worked in the morning though. On the iAquqlink box itself, the red power light is not even on, no light is on.
I also tried turning on my pump in 'service' mode but it wouldn't start. I can turn on my lights and if I toggle to spa mode, I see the valves move in response but the pump just won't start. Everything was working perfectly 5 minutes before, because I just got my gas lines hooked up to a bigger meter and the pool guy was running the spa and heater in service mode. I switched to auto after he left to test the heater from my phone and that's when it showed as offline. I went back to service mode and tried to turn on the pump and nothing happens. I have checked all the breakers in the Aquqlink RS box, turned them off and on, still nothing. There is a reset button in there, should I hit that? What exactly will it reset?
I also tried turning on my pump in 'service' mode but it wouldn't start. I can turn on my lights and if I toggle to spa mode, I see the valves move in response but the pump just won't start. Everything was working perfectly 5 minutes before, because I just got my gas lines hooked up to a bigger meter and the pool guy was running the spa and heater in service mode. I switched to auto after he left to test the heater from my phone and that's when it showed as offline. I went back to service mode and tried to turn on the pump and nothing happens. I have checked all the breakers in the Aquqlink RS box, turned them off and on, still nothing. There is a reset button in there, should I hit that? What exactly will it reset?