iAqualink 2 and Intelliflo3

[Mauigrays]

I have an in ground pool with spa on a single speed pump and a waterfall on a separate pump. iAqualink 2.0 automation system. Changing out single speed pump for a Pentair Intelliflo3 VSF. Told by Leslie’s that the Pentair, latest model, would definitely talk to iAquaLink 2.0. Certified technician could not make that happen. IAquaLink 2.0 was checked for board revisions and all was good by Jandy. What can I do to make this connect?

Moved from here.

 

[MSchutzer]

Hi, see this thread showing how to configure the intelliflow 3 to talk to the iAquaLink system, the key is that you need to choose intelliflow VS as the VSP pump type.

It doesn’t matter that you have a iAquaLink 2.0 system, it works the same as you have a recent firmware version, and you said Jandy confirmed your version is fine.

Thread 'Can’t connect IAqualink 3.0 to new Intelliflo3 vsf'
Can’t connect IAqualink 3.0 to new Intelliflo3 vsf