we have concrete coping. I want to just paint a couple stripes onto the coping edge for where the slope to the deep end starts and ends. I figure about four one inch wide stripes, total. Just a visual reminder of where the depth changes are. Is there a paint that would work better for this or would anything be ok?
I want to paint depth markers on concrete coping. What paint?
- Thread starter JenfromNC
- Start date
Wonder if you could use a sticker with the depth like a 5 or probably find a “line” online 
They might hold hold up longer and be easier to remove down the road?
They might hold hold up longer and be easier to remove down the road?
Im open to anything. Sticker for the fiberglass or do they make something that would stick to concrete?
- May 3, 2014
- 58,550
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Do a search - Pool Depth Markers. Lots of hits. Many say they will stick to concrete. May not last forever, but should last a season or two.
I haven’t found anything suitable online. I just figured i would ask here before hitting it with random spray paint or something. I can cut outdoor vinyl, but i didn’t figure it would stick to the concrete. It didn’t turn out very smooth.