I need a replacement for my Pentair Sta-Rite Max-E-Pro P6RA6YG-207L pool pump (motor Model No. K48M2P105B1)

Jump to latest Follow Reply
N

npkr

0
Feb 9, 2013
20
My pool company opened my pool and discovered the motor is corroded and dead. I purchased this pump in 2019. I would like to replace the motor rather than the entire pump, especially as I will be selling my home within the next year. Unfortunately, what I've found online is that Pentair no longer manufactures the replacement motor for this pump model. Does anyone know if there is an aftermarket replacement motor that is compatible with this pump?
Thank you!
 

Century (A.O. Smith) 1.5 HP Full Rate Motor (Total HP 2.20), Square Flange 48Y Frame, Dual Speed - Model SQS1152R - INYOPools.com

Pump Motor from AO Smith
www.inyopools.com www.inyopools.com

PART # SQS1152R

WARRANTY 1 YEAR

DIMENSIONS 14.5" L X 9" W X 6.5" D

ALTERNATE PART #'S 12073, 12201, 177145, 5KCR49SN2095X, 8-177145-04, 8-177145-05, B962, B983, B985, C1312, C48A25A24, EB983, K48M2P105, K48M2P105A1, K48M2P105B1, K48M2P106, K48M2P106A1, K48M2PA105A1, K48M2PM101, K48M2PU101, SQH15FL2, SQS1152R, 35-126-1176, AOS-60-5222, CRMSQS1152R
Product Description
Century (A.O. Smith) 1.5 HP Full Rate Motor (Total HP 2.20), Square Flange 48Y Frame, Dual Speed - Model SQS1152R

**NOTE THIS MOTOR IS SHIPPED LESS HI-LO SWITCH. YOU MAY PURCHASE THE HI-LO SWITCH SEPARATELY BY ORDERING PART # 1011431-001.**

Voltage 230, High Speed HP = 1 1/2 Low Speed HP = 1/4, Max Amps @ High HP = 10.4 Max Amps @ Low HP = 3.7, Dual Speed, Square Flange, RPM @ High Speed = 3450 RPM @ Low Speed = 1625, Threaded Shaft, Frame = 48Y Used on the following models: Sta-Rite Max-E-Glas, Max-E-Glas II, Dura-Glas, Dura-Glas II, Dyna-Glas, Dyna-Max Pentair Whisperflow, Pinnacle and Anthony AR2 Series.
 
JamesW I can't thank you enough. I really appreciate your help.

I've decided to order the

Century (A.O. Smith) 1.5 HP Full Rate Motor (Total HP 2.20), Square Flange 48Y Frame, Dual Speed - Model SQS1152R​

My only problem at this point is I don't know what seals and gaskets kit to order with this motor. A lot of listings on various websites list the compatible GO-kit but this one does not. Do you know what kit goes with this motor or where I can look it up? I tried looking it up on inyopools.com but I could not identify any seals or gaskets, by kit or sold separately, that were specified for this particular motor replacement model.
Thank you again!
 
JamesW I can't thank you enough. Prior to posting I spent 2 hrs. searching for the correct replacement motor but it was extremely difficult just to know what parts were compatible. I don't believe I would have ever been able to locate the information you posted. I ordered my motor and the appropriate seals and gaskets per the info you provided. Being able to do this myself will save me $2200 as my pool servicing company will only replace the entire pump; they will not replace the motor alone. Very grateful. Thank you again.
 
  • Like
Reactions: JamesW
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply