Another Update-
Here are today’s results after adding water:
FC 7.5 (added 3 quarts liquid chlorine)
pH 8.0
TA 100
CH 450
CYA 110 (did the 50/50 test and level was just between 50 and 60)
CSI .52 (potential for scaling...) this has crept up
I've been maintaining my pool since I partially drained it a few weeks ago...Brushing all surfaces, skimming surface, emptying skimmer and pump baskets and Racer, checking/adding chemicals. I haven’t bought a vacuum yet, so it’s been 2 weeks since it was vacuumed.
I notice that when I brush the spa, the water becomes cloudy. The pool doesn’t look cloudy but maybe that’s because of the greater volume compared to the spa. Although I can see some “debris” when I brush the steps.
I also noticed that the flow over the spa has slowed down somewhat. I checked the filter and the pressure is at the low end of normal. I had the filters cleaned on June 8th. Somethings up...so I’m having it looked at on Tuesday. Also, my Racer rotating brush isn’t working so that’ll hopefully be fixed Tuesday, too.
Questions:
- What do you think is causing the cloudiness?
- Why is the csi creeping up?
- What do I need to do now?
Here’s a link to my results:
Thanks All!