Hello to all,
[Correction: Title should read: "How to 'get' VSP to pull water from Spa to Pool"
Allen has been helping me w troubleshooting a leak in my spa. A PB stated that most leaks are from the light niche, but I am not 100% it is the light niche. So, I might have to see if one of the 2 drains are the culprit if the might niche does not show a leak.
My SPA is 10' x 10' and is raised 2.5 ft, therefore that's about 800-850 gallons to get to the drains. I saw a tech one time do something to my VSP [Hayward EcoStar] and he pulled the water from the SPA to the Pool. He put tape over the pool spillover drain.
Does anyone know the steps I need to perform to get my pump to reverse the water flow from Spa to Pool, then water I need to do to get the water back into the after I perform my testing and hopefully an eventual fix? I have both pool and spa modes and here's a pick of the equip pad. Thank you very much and let me know if you have any questions/
regards,
tstex
[Correction: Title should read: "How to 'get' VSP to pull water from Spa to Pool"
Allen has been helping me w troubleshooting a leak in my spa. A PB stated that most leaks are from the light niche, but I am not 100% it is the light niche. So, I might have to see if one of the 2 drains are the culprit if the might niche does not show a leak.
My SPA is 10' x 10' and is raised 2.5 ft, therefore that's about 800-850 gallons to get to the drains. I saw a tech one time do something to my VSP [Hayward EcoStar] and he pulled the water from the SPA to the Pool. He put tape over the pool spillover drain.
Does anyone know the steps I need to perform to get my pump to reverse the water flow from Spa to Pool, then water I need to do to get the water back into the after I perform my testing and hopefully an eventual fix? I have both pool and spa modes and here's a pick of the equip pad. Thank you very much and let me know if you have any questions/
regards,
tstex
Attachments
Last edited by a moderator: