if it's over .5 I'd be a little worried. You can do the overnight FC test and determine if you need to shock. If your CC is up there, that would explain why you have the bleach smell. It's possible if your FC was 0.
Maybe it's just me and my mind playing tricksHouTex said:I switched from a Clorox pool (for only a couple of months) to a SWCG. I did not smell chlorine when using Clorox and I do not smell chlorine with the SWCG.
Thanks. I will post numbers later. Could my regents be bad after a year?JasonLion said:Phosphates have nothing to do with it, aside for making the people who sell them money.
You might have a low level algae problem. With a SWG you can have algae and clear water. You should do an overnight FC loss test with the SWG off.
Another possibility is something wrong with the cell, though that is less likely.
You should also post a full set of water test results.
I did loose 3 or so in 14 hrs. Its hot right now and the pol gets direct sun almost all day. I am bringing the CYA up to 80 per you and the PB recommendation with the Aqualine.JasonLion said:If your CYA is really zero, or near zero, that is your problem right there. CYA needs to be around 70 to 80 with a SWG. Your CYA can't actually be zero, or you would have lost all of your chlorine already, but it could be something quite low, like 10 or 15, which will read as zero on the test.
JasonLion said:No, that is a more complex issue. The smell is CC, which forms when the FC level is too low. Your FC level has been to low recently, so you got some CC, which then outgases over a period of time. Once the FC level is stable at an appropriate level, CC will stop forming and the smell will go away.
chem geek said:In particular, when you don't have any CYA in the water, then the active chlorine level is much higher and will tend to produce orders-of-magnitude nitrogen trichloride which is very smelly -- the odor threshold is 0.02 ppm (20 ppb) which is well below what can be tested in the CC test.