Hope I did this right!

Knmsaylor

Member
Jun 24, 2024
6
Kentucky
Pool Size
29555
Surface
Vinyl
Chlorine
Liquid Chlorine
I just tested my pool water with the recommended kit Taylor 2006c. This was the results:
CC 1ppm
FC 0.2 ppm
PH 7.6
CYA - maybe less than 30...I added the mixture to the tube but the black dot never got smaller
TA 100
CH 130

I know it needs more chlorine but anything else?
 
The black dot doesn't get smaller, it gets obscured.

I'd add 20ppm of dry granular chlorine stabilizer. Use the sock method.

Get some liquid chlorine in the pool. 3ppm.

Do this test tonight...Link-->Overnight Chlorine Loss Test

Will tell us if we

The black dot doesn't get smaller, it gets obscured.

I'd add 20ppm of dry granular chlorine stabilizer. Use the sock method.

Get some liquid chlorine in the pool. 3ppm.

Do this test tonight...Link-->Overnight Chlorine Loss Test

Will tell us if we have algae...
OCLT results...

Last night

FC 4

CC 1



This AM

FC 1.4

CC 0.4

Will be starting SLAM 🙂
 
  • Like
Reactions: Jimrahbe
I would change your FC testing protocol. Use 10mL of pool water. Each drop is .5FC. Use this now and everyday testing. .5FC discrimination is just fine and will save reagent.

SLAM ON!!
 
  • Like
Reactions: Knmsaylor
Ok...started SLAM yesterday..
1900
FC 3.5
CC 0.5

Added some chlorine before bed to keep up overnight

This AM 0830
FC 4.5
CC 1

1300
FC 0.5
CC 0.5

Where did all my chlorine go in a few hours??
 
Algae/Organics. Chlorine is consumed killing it. You need to test and replace more often, particularly in the beginning. No more than every 2 hours.
 
  • Like
Reactions: Knmsaylor
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.