I just added a gallon on stabilizer and am waiting for it to filter. I need to add no phos (one gallon) and then shock. Do i need to wait three days to add the no phos?
Last edited by a moderator:
High phosphates, low cya and no chlorine
- Thread starter emeryj
- Start date
- Jul 21, 2013
- 65,403
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
Best if the no phos finds its way back to the pool store. There is no need for it.
By shock you mean liquid chlorine?
What is the situation with your pool?
www.troublefreepool.com
www.troublefreepool.com
www.troublefreepool.com
Best if the no phos finds its way back to the pool store. There is no need for it.
By shock you mean liquid chlorine?
What is the situation with your pool?
Phosphate Removers - Further Reading
www.troublefreepool.com
Algae Archives
www.troublefreepool.com
Pool Care Basics Archives
Your one-stop shop for all things TFP to include: ABCs of Water Chemistry, Recommended Chemicals/Levels, Test Kits, Troubleshooting, and much more!
www.troublefreepool.com
Free chorine .08, FAC .08, PH 7.3,ALK 123, CYA 5, PHOS 1913, I see some whitish algae, otherwise completely clear, added one gallon sanitizer today plu tried vacuuming. That’s as far as I’ve gotten. Running filter 24/7 and have 17,000 gal pool. ABQ. HOT…..
- Jul 21, 2013
- 65,403
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
With the money you get back when you return the phos free you need to get your own test kit - Taylor K-2006C or TFT Test Kits Leslie does not sell them and the TFT kit is a better value.
Then follow the SLAM Process step by step without shortcuts. Adding stabilizer and the liquid chlorine is a great first step.
Then follow the SLAM Process step by step without shortcuts. Adding stabilizer and the liquid chlorine is a great first step.
Similar threads
