High Flow Kit for SWG's ?

[xclaim494]

Is there a kit or an option to run water directly to a Salt Chamber top get the flow up ? : Just like there was the High Flow Kit from Pentair for the Rainbow's ?

Amazon.com: Pentair R171099 Hi-Flo Tubing Replacement Kit Rainbow Automatic Chlorine/Bromine In-Line Pool and Spa Feeder: Garden Outdoor

Sure would help with Low flow situations especially from the Variable Speed Pumps ?

thanks.

 

[Jimrahbe]

x,

I have never hear of such a thing... If you are having problems with low flow, something else is wrong...I run my simple system at 1200 rpm and my flow switch works just fine..

What speed are you trying to run, and at what speed does your flow switch currently close?

Thanks,

Jim R.

 

[Philo]

I take out the flow switch and use 2 pair of needle nose pliers. Hold the end closest to the top and use the other needle nose to bend the paddle 50% closer to the stem. Works like a champ.....

 

[xclaim494]

Thanks for the replies guys..

I have a Aquapure EI where the salt chamber is actually installed vertical.. I believe Jandy has discontinued the product. Also the specs say that the GPM has to be 40 or above..
At 1200 or 1700 I'm not going to be getting 40 GPM.

Maybe I should send back the aquapure and just get the regular Hayward salt chamber that installs horizontal into the return line?

Thx again

- - - Updated - - -

Here is what I'm trying to install :

Jandy AquaPure Ei Series Salt Generator | APURE35

 

[PoolguyinCT]

x,

I have never hear of such a thing... If you are having problems with low flow, something else is wrong...I run my simple system at 1200 rpm and my flow switch works just fine..

What speed are you trying to run, and at what speed does your flow switch currently close?

Thanks,

Jim R.

I’m with Jim on this one, the other suspect is poor placement of the unit in water-path.