Help with waterfall build-hits coping at low speed

[blk94f150]

I'm building a jumping off ledge with a waterfall. When I run the pump fast enough or turn off enough pool returns it clears no problem. If the speed is too low it will trickle down the front and out of the pool. Is that just the way it is or am I missing something?

 

[SecoSteve]

Can you hang the base rocks over the edge a couple inches so the slower speed water clears the coping?

 

[Jimrahbe]

blk,

That is kind of how it works. The wider the ledge, the more water you need to push over it.

Jim R.

 

[blk94f150]

Can you hang the base rocks over the edge a couple inches so the slower speed water clears the coping?

I could but I don't have a lot of room to make that move with the plumbing.

 

[blk94f150]

blk,

That is kind of how it works. The wider the ledge, the more water you need to push over it.

Jim R.

That's basically what I was thinking. I need to see if there's a way to make my Tristar VS just stay in the last speed set. My concern is setting it to speed 3, forgetting about it and it goes back to speed 1 at midnight.

 

[Jimrahbe]

Blk,

Do you plan to run the waterfall all the time?

Jim R.

 

[blk94f150]

Blk,

Do you plan to run the waterfall all the time?

Jim R.

No, just when we're out there. Probably 50% of the time.