*I have not bought the Circupool RJ60 yet* I'm trying to do my homework before I make such a big purchase.
Going with the RJ60 to make sure I have a large enough system. In a previous thread - Really dumb SWG question - some recommended I needed to change by board and upgrade it. Doing some research, it appears I can stay with my current board and just wire the Circupool direct to the power for the pump.
I emailed Circupool but they weren't very helpful, just referred me to the manual.
Looking at the inside of my box, the wires coming in from the pump (blue circle) include a black, white, blue and green wire. Green is ground obviously and will go to the bus bar.
In my box, the red wire from the pump goes to one of the load sides of a relay (white circle).
Black wire from the pump goes to a wire nut and then to a black connection to some sort of relay that I don't know what it is. (green circle)
Blue wire from pump also goes to a wire nut and then to a red wire also in the green circle.
Circupool has three wires - black, white and green - and per the manual the green is ground and the black and white go to load wires. So where would I put them in mine? Black circupool wire to black wire (in nut) and then white circupool wire to blue wire nut?
I'm hoping this makes sense.
Going with the RJ60 to make sure I have a large enough system. In a previous thread - Really dumb SWG question - some recommended I needed to change by board and upgrade it. Doing some research, it appears I can stay with my current board and just wire the Circupool direct to the power for the pump.
I emailed Circupool but they weren't very helpful, just referred me to the manual.
Looking at the inside of my box, the wires coming in from the pump (blue circle) include a black, white, blue and green wire. Green is ground obviously and will go to the bus bar.
In my box, the red wire from the pump goes to one of the load sides of a relay (white circle).
Black wire from the pump goes to a wire nut and then to a black connection to some sort of relay that I don't know what it is. (green circle)
Blue wire from pump also goes to a wire nut and then to a red wire also in the green circle.
Circupool has three wires - black, white and green - and per the manual the green is ground and the black and white go to load wires. So where would I put them in mine? Black circupool wire to black wire (in nut) and then white circupool wire to blue wire nut?
I'm hoping this makes sense.
