Hi Everyone,
First time pool owner. I've read through the pool care basics, and ran my first test using the TF-100 test kit. I'm not sure I really understand the results though because some of them are well above the recommended range, so I'm not sure if I did the tests wrong
PH = 7.8
FC = 12.5 (recommended range on the Pool Math app is between 1 and 3)
CC = 0
CH = 1,300 (recommended range on the Pool Math app is between 0 and 650)
TA = 120 (recommended range on the Pool Math app is between 50 and 90)
Salt = 3,000
CYA = Tested twice, it was inconclusive both times. I followed the instructions that came with the TF-100 test kit but I could still see the black dot even after filling the test beaker all the way
Temperature = 60F
The pool is a 20K Gal Salt Water pool with a spa. Dimension is 36 x 18 (with depths from 1ft to 6 ft). I'm not sure if it's vinyl or concrete, is there an easy way to tell? I can post pictures, if that helps
First time pool owner. I've read through the pool care basics, and ran my first test using the TF-100 test kit. I'm not sure I really understand the results though because some of them are well above the recommended range, so I'm not sure if I did the tests wrong
PH = 7.8
FC = 12.5 (recommended range on the Pool Math app is between 1 and 3)
CC = 0
CH = 1,300 (recommended range on the Pool Math app is between 0 and 650)
TA = 120 (recommended range on the Pool Math app is between 50 and 90)
Salt = 3,000
CYA = Tested twice, it was inconclusive both times. I followed the instructions that came with the TF-100 test kit but I could still see the black dot even after filling the test beaker all the way
Temperature = 60F
The pool is a 20K Gal Salt Water pool with a spa. Dimension is 36 x 18 (with depths from 1ft to 6 ft). I'm not sure if it's vinyl or concrete, is there an easy way to tell? I can post pictures, if that helps