HELP! Someone messed with my system - AquaLink

Jump to latest Follow Reply
L

LaurenR

Member
Jul 31, 2024
13
Bonita Spring, FL
I am hoping someone can help me. Someone did something to my pool equipment. I noticed my pool pump did not turn on this morning. Also my spa level was low which is not normal. I also noticed my neighbors pool filter was not on and after talking to them it appears someone messed with both of our systems. He was able to just switch on his filter to start it up. Mine seems a bit more complicated.

AquaLink 3.0 - All the lights are on - red, yellow and green. My phone will not connect to the pool. My pool lights also not going on their usual timer.

Jandy Pro Series. I believe this is for my salt system? - power is off and will not power on.

AquaLink Panel - red service light is on and red pool mode is on.

Nothing on my breaker is tripped.

Appreciate any assistance! Camera will be going up asap.
 
MSchutzer said:
Just press the button underneath the service light until it toggles back to the Auto light being on. Then you will be able to control the system from the phone, and the preprogrammed schedule will run as scheduled.
Click to expand...
Thank you so much!! I was able to get the pool running again and added water to the spa. I really appreciate your help. Adding a lock to the panel and a camera to the side.
 
You must log in or register to reply here.
Top Bottom
Back
Jump to latest Follow Reply