I was just going to pump out some water from my AGP to lower my CYA, and my sump pump put a hole in the seam at the bottom of my liner! I'm running to the hardware store, is there anything I can get there to stop the leak before I have 5k gal of water in my backyard! Gah!!!
HELP quick please!
- Thread starter ebaldes
- Start date
How big is the hole?
You would be better off to get in, and apply the patch to the inside.
You would be better off to get in, and apply the patch to the inside.
It’s a good 5”. I’ve tried everything, including getting in and nothing is working. OMG, this sucks.
repairing along the seam is going to be tricky.. try 2 smaller patches on both sides of the seam then put a patch over both..
Well, nothing worked while it was gushing. The opening was so big that everything I tried just kept getting sucked out through it due to the high water pressure.
My entire pool drained into my backyard. Thankfully my FC was close to zero because I had been out of town for a few days. So I don’t think my grass will be damaged. But my soil doesn’t drain well, which was my biggest concern. Gonna be soggy for a while.
I decided to just go go ahead and order a whole new liner and chalk it up to a lesson learned. Dang.
My entire pool drained into my backyard. Thankfully my FC was close to zero because I had been out of town for a few days. So I don’t think my grass will be damaged. But my soil doesn’t drain well, which was my biggest concern. Gonna be soggy for a while.
I decided to just go go ahead and order a whole new liner and chalk it up to a lesson learned. Dang.