Bought a new 18x33 above ground pool and I have decided to dig it down about 20 inches. I rented a skid steer and roughed in the hole for the installers. I was within 3-4" of level. The installers agreed to finish leveling and put together pool for me. Turns out they were most likely not familiar with doing pools and they didn't not level the ground and did several other things wrong. The pool once installed was the same 3-4" off level. I showed them and they agreed to disassemble it and make it right. Today they came back to reinstall and have put down the 4 buttresses on each side. I went out near dark and set up my laser to check how close they were. Now it seems they are about 3/4" out side to side with maybe one buttress being 1". Would you find this acceptable or have them dig down the one side 3/4" to get it closer?
Last edited:
