I used an algaecide in my indoor pool yesterday, water had green tinge and looked tired but it has now gone very murky. I use bromine as a sanitizer, the readings were
TA 132
PH 7.3
BR 3.0
TDS was low and I not shocked for a month.
Any advice on how to clear it? I have put Lo-chlor miraclear clarifier in and I used lo-Chlor knockout algaecide. It’s a liner pool and volume 25m3. Photo is at steps usually clear to the bottom!
TA 132
PH 7.3
BR 3.0
TDS was low and I not shocked for a month.
Any advice on how to clear it? I have put Lo-chlor miraclear clarifier in and I used lo-Chlor knockout algaecide. It’s a liner pool and volume 25m3. Photo is at steps usually clear to the bottom!