Re: HELP i'm in a complete mess and don't know which way to
Since you dragged (or is that drugged) me kicking and screaming over here. :-D
I think your threads are fine, unless you crossthreaded them. Hopefully that didn't happen. In reality you should never be able to screw threaded pipe fittings together far enough so that all the male threads are hidden.
Did you use lots of Teflon tape or paste on the threads? If you didn't, that's your problem.
If it's not leaking really bad, just wait till the new fitting gets there and swap them out.
Since you dragged (or is that drugged) me kicking and screaming over here. :-D
I think your threads are fine, unless you crossthreaded them. Hopefully that didn't happen. In reality you should never be able to screw threaded pipe fittings together far enough so that all the male threads are hidden.
Did you use lots of Teflon tape or paste on the threads? If you didn't, that's your problem.
If it's not leaking really bad, just wait till the new fitting gets there and swap them out.