Hi, I’m wondering if what we are experiencing is considered normal. Our pool was professionally closed 8 days ago and closing chemicals were added. Re history, our pool was redone a little less than two years ago…new concrete around the pool, new plaster, etc. We are in a constant battle to control the Ph. We checked the Ph this morning and are already at a firm 8, so we added about a half gallon of acid. The day the pool was closed the Ph was actually 7.1; it was high the day before closing so we added acid. During the summer we have experienced scaling and have been scooping up bits of white matter/flakes from the steps and the bottom of the pool. Our pool builder mentioned there are impurities in our plaster, but we are not sure what that means.
We have been fairly successful pool owners for many years and are at a loss as to what is happening. We worry about the high Ph, but are also concerned about the white matter possibly ruining the pool equipment such as the heater. Our pool is about 16x32, gunite, salt, 18,000 gals. We have had our water checked numerous times and other than low Alk which was corrected and high Ph which is constantly corrected, our water looks good. Thanks for any advice!
We have been fairly successful pool owners for many years and are at a loss as to what is happening. We worry about the high Ph, but are also concerned about the white matter possibly ruining the pool equipment such as the heater. Our pool is about 16x32, gunite, salt, 18,000 gals. We have had our water checked numerous times and other than low Alk which was corrected and high Ph which is constantly corrected, our water looks good. Thanks for any advice!