I am leaking water out my drain line, just a trickle but it’s enough over time to drop the water level. I have model SP0714G11M valve. I can’t seem to find a replacement for this...is there another one I can use? The seal is the type that’s glued in so whole key assembly has to be replaced. Thank you
Hayward Vari-Flo Valve
- Thread starter greggtraylor
- Start date
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Like most Hayward models, Greg's requires replacing the whole key. You can't replace just the gasket.you should be able to replace the o rings and be good to go
The replacement key is the SP0714T. http://www.inyopools.com/HowToPage/how-to-repair-a-leaking-hayward-backwash-valve.aspx (See the comments.)
- Jul 3, 2013
- 9,028
- Pool Size
- 15000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool SJ-40
Wow, way to go Hayward.... glue it so you have to replace the whole piece and they can make more money.... I wonder if you can buy a model that you can replace the gasket...
Call Inyo pool and ask them, they are great at these things
Call Inyo pool and ask them, they are great at these things