My Hayward vari-flo value has started leaking through the waste-out line and I'd like to get a gasket kit of some kind to rebuild it.
Looking at the label on the valve, it says SP71 (printed) followed by 0X32 (stamped).
It has 1 ½ piping and it's connected on the side of what I believe to be a Hayward S200 sand filter.
I found the diagram for the S200 sand filter online...
...and it lists the valve part number as "SP0710X32"
I see several different "kits" of various gaskets online, some by Hayward, some by "Tork" but it's hard to tell which is the correct one.
I'd like to have a genuine Hayward kit, if such a thing exists but I'll consider a high quality non-Hayward kit if there's one that people here recommend.
What do I need?
Looking at the label on the valve, it says SP71 (printed) followed by 0X32 (stamped).
It has 1 ½ piping and it's connected on the side of what I believe to be a Hayward S200 sand filter.
I found the diagram for the S200 sand filter online...
...and it lists the valve part number as "SP0710X32"
I see several different "kits" of various gaskets online, some by Hayward, some by "Tork" but it's hard to tell which is the correct one.
I'd like to have a genuine Hayward kit, if such a thing exists but I'll consider a high quality non-Hayward kit if there's one that people here recommend.
What do I need?
