Hayward SP260VSP - service manual or fuse inside?

[robbegginer]

Does anyone know of a service manual for the Hayward SP2600VSP, or similar model? Alternative, does anyone know if there is a fuse or breaker within the control panel?

The pump won't turn on, the power LED Is dark.

A possible cause is a lightning strike somewhere near the house, power was lost, and neighbors have had issues as well.

After resetting the entire house & other breakers, I was able to read good 220V at the outlet which provides the pump.

I'm about to take the cover off of the control portion of the pump, but would certainly like to have whatever documentation may be available before I proceed.

Thank you

 

[robbegginer]

Yes, something blew in the power supply portion of the board, my guess is that it's a capacitor.

I've confirmed that good 230V power is received by the black & white power input at the terminal block.

I've got a closeup, the red arrow pointing to what looks like the remains of an electrolytic capacitor
The blue arrow points to what I'm guessing is a surface mount diode. I'm guessing it's just some flash residue
from the blown capacitor on it and the surrounding pieces.


Here is a view of the entire board, and the pump itself. [Could not upload any more photos. Have "exceed quota error"]

1. Does anyone know the rating of this capacitor?
2. Has anyone replaced one of these before?
3. Does anyone have a schematic, or service manual for this model?
Model SP2600VSP
serial 21121305001004006

thanks