Hayward OmniLogic Pump functioning opposite

[RMcPool]

This just started happening, we used the pool and spa last night with no issues and I haven't changed anything. When I put the pool in pool mode and pump on the water only pumps into the spa as if it were on spa mode. When I put the pool in spa mode it pumps through the pool however the water level in spa drops unusually low. I have shut the system down and reset several times with no change. Any ideas or recommendations would be greatly appreciated.

 

[ajw22]

Your return valve actuator has got misset.

There is a toggle switch on the side of the actuator. It has 3 positions - ON1-OFF-ON2. Flip the toggle to the other position and the valve should rotate. See if that fixes your problem.

If not we will need to see pics of your actuators in POOL and SPA mode.

 

[RMcPool]

That fixed it! Thank you! TFP came through again.