My pool was completed in November and everything has been fine up until this morning. My VSP will turn on for about 30 seconds and then shut down. It will then turn back on once the initial run timers runs out but it will only stay on for another 30 seconds or so before shutting back down.
Everything is cool to the touch and I'm not really sure what could be causing this issue. The water level in the pool is fine, all skimmers are empty, the pump basket is empty, the impeller turns freely.
Everything is under warranty but we have the coldest weather of the year (low 20's) starting in 2 days and I'd prefer to get a jump on this in case they can't look at it tomorrow.
I'm working on filling out my signature asap but this is a gunite pool with raised spa.
Thanks for any advice you can give!
Everything is cool to the touch and I'm not really sure what could be causing this issue. The water level in the pool is fine, all skimmers are empty, the pump basket is empty, the impeller turns freely.
Everything is under warranty but we have the coldest weather of the year (low 20's) starting in 2 days and I'd prefer to get a jump on this in case they can't look at it tomorrow.
I'm working on filling out my signature asap but this is a gunite pool with raised spa.
Thanks for any advice you can give!