Hayward AquaRite Salt System Lights

[captainron1900]

I have an AquaRite Electronic Chlorine Generator. Opened pool yesterday and already had 3100 PPM of salt in pool. Power light is on fine for generator but noticed today the "Generating" light is not lit and has not been lit. If I switch to super chlorinate it lights up but not during normal operation. Is this a concern or is there something I should do? Like I said pool was just opened - company that came out shocked I believe and temp is 57 on water

 

[JamesW]

What are the diagnostic readings?

Is flow good?

 

[captainron1900]

What are the diagnostic readings?

Is flow good?

Flow is good - I FELL LIKE AN IDIOT

When looking at the 3 position switch "Super Chlorinate, Auto, Off" I had it switched to the OFF position forgetting it is to run the system. I just immediately thought the 3 position switch was for Super Chlorinating only ! DUH

Anyway I did check the Diagnostics but how do I know what reading is for what?

First one is 3100 which I know is the Salt PPM the rest of the figures that appeared when pushing the Diagnostic Button were...
61
32.1
0.00
66P
0
AL 0
r 1.59
15 (which had a weird figure next to it that looked like an upside down "f")

 

[captainron1900]

Disregard last - I found book which outlined all of the Display Diagnostics

 

[JamesW]

Ok, glad that it was an easy fix.