Hayward AquaRite No Amps

[boltjaM3s]

Hello- I just replaced my 6 year old t-cell 15 with a genuine Hayward 15 t-cell. However, at certain times during the day when I scroll through the diagnostic menu, I see that the amps is 0, and the current salt reading is 0. However on the board, the 'Generating' LED (and power LED) is on, and no other LED is on indicating everthing is working fine.

My % is set to 45%.

Is it normal for the t-cell to not have amp reading yet have the "generating" LED on? Or is there some other issue I need to worry about? Thank for any insight you guys can provide!

 

[JamesW]

The generating light stays on the entire time, even when it's not actually generating.

It's a 180 minute cycle. At 45%, the amps will be good for 81 minutes and then drop to zero for 99 minutes.

Perfectly normal behavior.

 

[wireform]

I second James

 

[boltjaM3s]

Thank you guys! Wanted to be sure I installed the cell correctly. I rarely ever checked the amps before, so this time it threw me off. Thanks again!