We have the Hayward Aqua Trol RJ salt generator. The power light is on so we have power but all the other lights are not lit and we’re not getting any readings, they show 0. We have reset it and replaced the thermister and still nothing. What else could it be?
Hayward Aqua Trol RJ Power light on, no others on
- Thread starter stepher75
- Start date
- Jul 21, 2013
- 65,575
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60
Welcome to TFP.
See pages 9-13 in Aqua Trol Diagnostics Manual .
The Hayward Aquarite Troubleshooting Guidelines can also be used with the Aqua Trol. The Aqua Trol is very similar to the Aquarite mainboard except for the filter/pump timer and additional K3 relay which carries the AC power to the filter/pump receptacle on the bottom of the case.
See Hayward Aquarite SWG for additional details on board diagnostics and repairs.
www.troublefreepool.com
See pages 9-13 in Aqua Trol Diagnostics Manual .
The Hayward Aquarite Troubleshooting Guidelines can also be used with the Aqua Trol. The Aqua Trol is very similar to the Aquarite mainboard except for the filter/pump timer and additional K3 relay which carries the AC power to the filter/pump receptacle on the bottom of the case.
See Hayward Aquarite SWG for additional details on board diagnostics and repairs.
Hayward AquaTrol SWG - Further Reading
www.troublefreepool.com