I am not opposed to doing it myself, but would prefer to get it done professionally. Has anyone found an installer to do the work in St Augustine? I am looking at the GPC-25. Thanks.
Has anyone found a Glacier Cooler installer in the northern FL area (St Augustine)?
- Thread starter Garet Jax
- Start date
jark87
Silver Supporter
- Jun 5, 2011
- 1,339
- Pool Size
- 25500
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Jandy Aquapure 1400
The closest installer to you that I could find on the Glacier website is in Orlando.
glacierpoolcoolers.com
If you have a Leslie’s in your area, they install them, or least they do here in DFW.
Good luck!
Service and Installation for Your Pool Chillers | Glacier Pool Coolers
glacierpoolcoolers.com
If you have a Leslie’s in your area, they install them, or least they do here in DFW.
Good luck!
Thanks. I have contacted a few installers around my area and none of them have installed a Glacier. I have not talked to all the Leslies in the area though.
With that said, I realized that I have a heat pump for the pool and it was set to 95 degrees.
I also hired someone for "pool school" and they pointed out that my system was wired wrong. The pump was on the timer while the autopilot was always hot. We switched the wires and now I am making progress on figuring out what I have. I may not need a chiller.
With that said, I realized that I have a heat pump for the pool and it was set to 95 degrees.
I also hired someone for "pool school" and they pointed out that my system was wired wrong. The pump was on the timer while the autopilot was always hot. We switched the wires and now I am making progress on figuring out what I have. I may not need a chiller.
Last edited:
