- Apr 29, 2018
- 328
- Pool Size
- 24000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60
Green clear water.
- Thread starter Derb22
- Start date
- Apr 29, 2018
- 328
- Pool Size
- 24000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60
Probably last post on this subject. Thanks for all the help from the always knowledgeable TFP CROWD!
Down to a reasonable FC of 17 last night after full sun all day. Waiting for it to drop under 10 to get an accurate PH number. (7.2 last night) Added the CYA and now at 60. Will need to bump CH up this weekend from 200 to 350ish to get CSI correct. ( any harm in jacking CH to 400-500?, what causes my CH to continually read on the lower end of the scale? I added a bunch last year to get it up to 350. Now back to 200.) I have to be away from the pool for a couple of days starting this afternoon so I’m going to start the SWG Today and run it at 40% just to keep the FC from going under mins while I’m gone.
Last nights numbers.
fc - 17
cc - 0
ta - 50
cya - 60
CH - 200
salt - 3800
BA - 40
ph - (7.2)
Down to a reasonable FC of 17 last night after full sun all day. Waiting for it to drop under 10 to get an accurate PH number. (7.2 last night) Added the CYA and now at 60. Will need to bump CH up this weekend from 200 to 350ish to get CSI correct. ( any harm in jacking CH to 400-500?, what causes my CH to continually read on the lower end of the scale? I added a bunch last year to get it up to 350. Now back to 200.) I have to be away from the pool for a couple of days starting this afternoon so I’m going to start the SWG Today and run it at 40% just to keep the FC from going under mins while I’m gone.
Last nights numbers.
fc - 17
cc - 0
ta - 50
cya - 60
CH - 200
salt - 3800
BA - 40
ph - (7.2)
