Green Algae on tile under water and pool

I have not had a chance to do the overnight test. I will do tonight.

Pics:

63684aa6-7735-37a6.jpg

63684aa6-7741-7da9.jpg

63684aa6-774d-4e84.jpg

63684aa6-775b-3f47.jpg
 

Attachments

  • ImageUploadedByTapatalk1333229335.406187.jpg
    ImageUploadedByTapatalk1333229335.406187.jpg
    157.4 KB · Views: 72
Hurricane Gio said:
Ok, it's a bit better, but its not gone. I brush it daily and shock twice a day. The FC never false below 10 and I get it up to 16 win shocking.
Any ideas?
I just wanted to chime in here and give you an idea that might help you. :wave:

As you know, the shocking process is a process and at no point in the process do you "shock" your pool (unless you are referring to the whole process including finishing algae free). Semantics maybe, but significant here since I get a minimum FC level of 13 ppm from the poolcalculator for your 30 ppm cya level. Treat that 13 as a minimum, never go below. This will make the process more efficient/effective. When you drop below you minimum, you may not be keeping up with the reproduction of algae anymore. So saying "shock twice a day" means you are roller coastering and sometimes you are below the minimum. If you can test and dose only twice a day, make sure you target a higher FC level, so that it will not drop below 13 ppm before you get back to the pool.

Lets use this shocking process to murder those pool interlopers :twisted:
 
Thread Status
Hello , This thread has been inactive for over 60 days. New postings here are unlikely to be seen or responded to by other members. For better visibility, consider Starting A New Thread.