We will be moving into a house in New Hampshire in about 2 weeks. The house has an approximately 40 year old fiberglass pool. Judging by the condition of the fiberglass, it has never been resurfaced. If anyone in the forum knows of a reputable fiberglass pool resurfacing company in New Hampshire, I would love to hear fro you. I’ve attached a photo of the pool. Any suggestions on how to estimate the volume?
First time pool owner
- Thread starter g8orz01
- Start date
- Jun 24, 2021
- 15,888
- Pool Size
- 29000
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-60 Plus
Use any pool volume calculator for a rectangle pool. Use the average of the W and Length, along with the depths. Use that to start.
When you dose for FC of pH, test 30 minutes after adjustment. If your result is less than expected, add 500 gallons. If more than expected, reduce by 500 gallons. Rinse and repeat until your result matches expectation.
Get a good test kit now so that you are ready when you move in...Link-->Test Kits Compared