First time closing - looking for expansion plug for bubbler - pentair colorvision
- Thread starter Rockybalboa
- Start date
- Jun 22, 2014
- 52,015
- Pool Size
- 17888
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45 Plus
I would think any rubber expansion plug should work for that opening. But you might take a look at the link below. They have a bunch of items as well.
www.leaktools.com
Anderson Manufacturing Company, Inc.
: Helping The Pool Professional Solve Leak Problems
- May 27, 2021
- 1,278
- Pool Size
- 17000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
What they are showing is a Shaw Plugs Mechanical Snap Tite expansion plug. Any expansion plug will work as long as is it a straight wall expansion plug per their recomendation. A good majority are tapered and won’t seal the underside of the lens.
+1. Looks like a standard issue drain plug for boats to me.
No suggested part was listed in the parts diagram in the manual.
No suggested part was listed in the parts diagram in the manual.
- Jul 21, 2013
- 65,062
- Pool Size
- 35000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-60