I'm in the process of filing my new pool now and trying to figure out the process with the chemicals. So what I gather is to balance out the levels of everything first, them test salt content and add appropriate amount of salt. Then I can turn on SWG. I know I need salt in the water before turning on SWG but can non saltwater still pass through cell when it's shut off to help mix chemicals/salt? I have a Solaxx Reliant SWG
First pool fill help with saltwater system
- Thread starter ratherbgolfing
- Start date
- May 3, 2014
- 58,383
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
There is no harm in circulating low salinity water through the SWCG.
Post your current test results. The only thing that is different for a SWCG is a higher CYA level and salt. You can most likely add the salt now. Do you have a salinity test kit? Please fill out your signature.
Post your current test results. The only thing that is different for a SWCG is a higher CYA level and salt. You can most likely add the salt now. Do you have a salinity test kit? Please fill out your signature.