- May 16, 2022
- 31
- Pool Size
- 26700
- Surface
- Vinyl
- Chlorine
- Salt Water Generator
- SWG Type
- CircuPool RJ-45
I have been using the PoolMath app but it never raised the FC until now. The app recommended 6 gallons to go from 0.5 to 24. I added and tested one hour later. FC 14.5!!! Put that number in the app and now I added 2.5 more gallons. I'll test in another hour.Basically, test, then add back to SLAM target. Your target with a CYA of 60 is 24ppm per the FC/CYA Levels. So if you test at 0ppm, you put 0 in Pool Math, put 24 for the target, put in the strength of the chlorine you're using, and it will tell you how much to add for your volume of pool. In an hour, if you test and it's 21ppm, you put 21ppm in the current, 24 for target, and it will tell you how much to add to get 3ppm more added. Repeat as often as you can, brush and vacuum often. Test and add at least 2-3 times a day, up to once an hour. The more you can do it the faster it will go. Taking a break to do things like sleep is fine - you'll just get back to it when you get up.
If your water is already still clear with no signs of algae, then really you're just looking to see if it drops overnight, between when you go to bed and when you wake up. If it doesn't, then you're done and you can let the FC drift back down to about 7-9. Test daily to make sure it stays in that area. Don't ever let it get below 5, because that's when you can get algae growing.
Let us know how it goes!
Once I hit my target of 24, do I keep testing hourly? Do I wait until tomorrow morning?
When do I turn the SWG back on?
When is the pH test reliable again? (i'm sure it's low now)
What do I use to raise the pH?
Thank you!