I have been using my ecotech a little over a year. Last winter it stopped coming on and i assumed it was a bad bq220220 fuse. I recently just opened the pool and put in a new fuse and all that happens is the run/stop keeps flashing green, nothing else on the pump works. I read on here that it could be the board. Has anyone had similar situation and how was it fixed? Any help is appreciated, i really dont have the extra funds to drop on a new pump.
Ecotech EZ VS pump issue - flashing green run/stop
- Thread starter Okegs4ever
- Start date
- May 3, 2014
- 58,717
- Pool Size
- 6000
- Surface
- Fiberglass
- Chlorine
- Salt Water Generator
- SWG Type
- Pentair Intellichlor IC-40
Welcome to the forum! :handshake:
I suggest you do a search of the forum. Put the name of the pump in the search box (upper right of this page) and it will search the forum.
There are quite a few hits.
Take care. Marty
I suggest you do a search of the forum. Put the name of the pump in the search box (upper right of this page) and it will search the forum.
There are quite a few hits.
Take care. Marty