Every time I try to change the schedule it adds “pool 8-5”. My concern is if I add other features for that pump that overlaps the pool being on from 8 to 5 which will it default to. Could you have a setting that has the pump run from 8 AM until 7:59 am the next day and also have several features that run throughout that time that uses the same pump?
Easy touch schedule
- Thread starter etherscreen
- Start date
E,
To run 24/7 you set the start and stop times the same.. As in 8 am until 8 am..
What you describe is what I do..
I run my Pool Circuit 24/7 at 1200 RPM and then change the speed with additional circuits.. The pump will always run the faster speed.. This means the Pool Circuit must be the slowest speed you every want to run.. If you look at the screenshot below you can see Pool is 1200 and Skim low is 1500, Skim High is 2000, and my waterfall is 2800.
Please let me know if this does not make sense.
Thanks,
Jim R.
To run 24/7 you set the start and stop times the same.. As in 8 am until 8 am..
What you describe is what I do..
I run my Pool Circuit 24/7 at 1200 RPM and then change the speed with additional circuits.. The pump will always run the faster speed.. This means the Pool Circuit must be the slowest speed you every want to run.. If you look at the screenshot below you can see Pool is 1200 and Skim low is 1500, Skim High is 2000, and my waterfall is 2800.
Please let me know if this does not make sense.
Thanks,
Jim R.
Thanks. I actually found why the pool looked like it wasn’t running..... I added DE last night and the sand filter was clogged. Backwashed and now running. Can’t decide if I want to add DE or not. Pool is a little cloudy and I’m starting SLAM again!