Easy touch night cool

[gsharrow]

I have any easytouch pl4/psl4 with smart logic. I have solar system and a heat pump. I live in south west Florida and would like to run my solar at night during the summer to help cool the pool. I read the other threads on night cool but I do not see that as an option scrolling through the easy touch menus (on the panel).

Any thoughts?

 

[Rocket J Squirrel]

Menu > Settings > Solar > page 2 > Night Cool:Yes

 

[gsharrow]

Thanks for the reply. My second screen Menu > Settings > Solar > page 2 > only has the freeze enable option. No Nightcool option is available. Any thoughts?

 

[Rocket J Squirrel]

You have both a heat pump and a separate thermal solar system, right? Did you perhaps mistakenly tell the ET that your solar was a heat pump on page 1 of the Solar menu?

 

[gsharrow]

Thank you for the reply.

You are correct both solar and a heat pump. If I understand your question, the second screen for solar does not have the heat pump enabled (see screen shot).

For what it is worth and I do not know if it makes a difference, my heat pump has a cooling feature as well, but it is a separate feature (see screen logic screen shot). It seems like a completely separate thing as I manually have to turn that on and off

 

[Rocket J Squirrel]

You seem to have it set up correctly, so I'm out of ideas. My ET is a different model than yours (and I don't have ScreenLogic); are you sure ET has the night cool feature? Do you have the user manual for it?

Paging ET experts @Jimrahbe and @ogdento ...

 

[Flying Tivo]

The ET PSL have very limited programin in comparison to the regular ET. So that could be the lack of feature.

 

[ajw22]

The ET PSL have very limited programin in comparison to the regular ET. So that could be the lack of feature.

An ET PSL4 can be converted to an ET8. Read...

Pentair Automation Systems - Further Reading

www.troublefreepool.com