Easy Touch 8 and Circupool RJ60 SWG

[neirbot]

I have a Circupool RJ60 SWG arriving tomorrow and I'm wondering if I can use one of the aux relays in the Easy Touch 8 panel to activate the SWG when the pump (VS) comes on. My guess is no, but I thought I'd ask. Or maybe there's a better way to wire it in the ET8. Thanks.

 

[Jimrahbe]

N,

You want to use the Pump/Filter relay, that is what it is for.. The pump/filter relay only closes when in the Pool mode or Spa mode and the pump is supposed to be running..

If your pump/filter relay is not being used, just connect the line side of the relay to AC power and the Load side of the relay to the SWCG's power or control center.

Thanks,

Jim R.

 

[neirbot]

Jim, thank you. That sounds like a simple solution.