I just added a spa to my pool and two valves to divert the water. I am struggling to get the valves to work through easy touch though, I can manually switch them and they work so they are definitely getting power. I am using a Pentair 520712 board with version 2.100 firmware.
Things I've tried: when I go through diagnostics it moves one of the valves a little bit, then back to the starting position, the 2nd valve doesn't seem to move at all (but it's in a tough to see location so maybe it does move slightly). Would diagnostics move the valves all the way back and forth? I have them plugged into Valve A intake and return ports, and here are my settings. Am I missing something? Is there some way I can do a quick test that should just move the valves? When I press Spa I see the pump speed increases but the valves don't budge.
Things I've tried: when I go through diagnostics it moves one of the valves a little bit, then back to the starting position, the 2nd valve doesn't seem to move at all (but it's in a tough to see location so maybe it does move slightly). Would diagnostics move the valves all the way back and forth? I have them plugged into Valve A intake and return ports, and here are my settings. Am I missing something? Is there some way I can do a quick test that should just move the valves? When I press Spa I see the pump speed increases but the valves don't budge.