dont want chemicals in my pool

[Teald024]

Adding 60 lbs of salt to 2880 gallons adds 2490ppm.
As long as your SWG is happy, then your good to go.

You still need to get an accurate CYA reading to determine the proper chlorine level. Not enough or no CYA will allow the Sun's UV to destroy all the chlorine in a few hours. Too much CYA will render the chlorine ineffective.

 

[1badgoat]

the only chemicals ive added is 6oz of dry tec

• 68% Calcium Hypochlorite (DryTec Calcium Hypochlorite Shock)

and 1 oz of phos free and 60 lbs of salt

 

[Teald024]

the only chemicals ive added is 6oz of dry tec

• 68% Calcium Hypochlorite (DryTec Calcium Hypochlorite Shock)

and 1 oz of phos free and 60 lbs of salt

You should urgently add a bit less than 2 pounds of granulated stabilizer to get your CYA level up to ~70-80ppm since you have a salt water chlorine generator. This will help you run the SWG less to maintain the FC level.