Does anyone know if you can replace the Non-swivel power cable that comes with the Proteus DX3 with a Swivel version? I am seeing mixed answers when I google it.
Dolpin Proteus DX3 Power Cable
- Thread starter jpilgreen23
- Start date
KenKasza
Gold Supporter
- Jun 19, 2023
- 97
- Pool Size
- 16000
- Surface
- Plaster
- Chlorine
- Salt Water Generator
- SWG Type
- Hayward Aqua Rite (T-15)
HERE is a link to a cable that should work. Verify that your DX3 uses a 2 pin cable.
I went with a non-swivel cable. The swivel never kept the twist out the cable and then the swivel failed electrically. I use to work on underwater cables so I cut the swivel out and spliced the two ends together then water blocked it. Work for a year before I got tired of looking at the splice. So bought a new cable without the swivel. No regrets.
I went with a non-swivel cable. The swivel never kept the twist out the cable and then the swivel failed electrically. I use to work on underwater cables so I cut the swivel out and spliced the two ends together then water blocked it. Work for a year before I got tired of looking at the splice. So bought a new cable without the swivel. No regrets.
